Thanks, I would appreciate it. I see you are asking about the flint tanks. I have them on my airplane they are nice. the pumps only run when you want to transfer from the tip tanks to the main tanks.
Has anyone installed one of the Skybolt camlock kits on an early (1960 or earlier) 180 or 182? Kit uses the 2600 series camlocks which have a 1/4 stud diameter, just eyeballing the existing screw holes...
I saw you are setting up a shop in Gig Harbor. I have a pair of surplus flaps from a C182P. One has a crushed inboard rib. I am looking to get rid of them but figure they have more than scrap value of the Aluminum. PM if interested. I am in Kenmore. I also have a SPW IO550 engine mount and some other parts.
At the risk of being flamed by the Fosso fanboys I present exhibit A: https://bushliner.com/aircraft/experimental-bushliner-1850-formerly-cyclone/
Is there any chance one of these will be produced to...
This topic can apply to several aircraft types but I'm mostly thinking about Cessnas.
Currently my airplane is indicating fuel quantity on the screen of an MVP-50 via information sent from the original...
Has anyone installed one of the Skybolt camloc kits for the C172 that originally had sheet metal screws into captive Tinnerman plates around the firewall?
https://store.skybolt.com/mobile/conversion-kits-c172c2800p-c347.aspx...
Hi Sam, I see that the brewery is closing and I hope your Dad is OK with it. Having to close Captains, 125 yr old business was difficult. Also, Ballard is a tough place these days.
Take care,
Jim Wheat
Remember this kit Cessna was giving away free a few years ago? SEB07-5
On the reel installed in my airplane, AmSafe P/N 505590-403, the little plastic fitting that attaches the manual release cable...
Hello all, seriously looking for a 172, 1978 or newer with factory seaplane kit.
Strongly prefer an already installed 180hp powerplant.
If you or anyone you know has an interest in selling such...
McCauley part 2A34C50NP
Serial 721664
1487.7 tt
218.8 tsoh 10-10-03
As removed from a C182E complete with nice red-painted spinner assembly and logbook.
$4500 obo
Halestorm
2062007213
Considering an upgrade to our 182E, would like some opinions on these engines.
Both choices are of similar power and weight, although the injected engine would require more work to install.
Currently...
Has anyone ever heard of an STC to put a Lyc O-470 or O-540 in a 180?
There's a '54 on Barnstormers that appears to have one, Field Approval?
Would be an interesting option...