-
7ECAdriver and 165 others have joined the group Cessna 180/185 Skywagon
-
RKTX created a new forum topic Cessna 180 Aux fuel options.So long story short I am looking for some kind of option for a 20 gallon or so aux fuel tank for my 180 that can be down in the fuselage somewhere. I am aware of the old school Javelin tanks but finding...2021-08-17 02:24:56 -
willgruy and 65 others have joined the group Texas Taildraggers
-
RKTX created a new forum topic B and C Gear Driven Alternator Approval (C180)Its finally cooling off Down here in Texas, and were planing out some winter projects for the 180. Among the list so far is some of the usual suspects, Firewall Battery, Carbon Fiber Flat Floor Ext Baggage,...2016-11-04 18:35:16
-
RKTX created a new forum topic The Big Cessna 180 / 185 Empty Weight ThreadIn an effort to avoid hijacking a FS: thread. I figured I would just start anew one. We all know that the C180/185 is a great airframe, however, empty weights range all over the place. Mostly, I suspect...2016-07-30 16:42:37
-
RKTX created a new forum topic WTB: 57' or 58' C180 or 182 Glove BoxBeen scouring the internet for a while but can't find one. I believe that 57 and 58 180 or 182 are the only ones that would fit, but I'm not totally sure, so if you know of others that would work please...2016-06-19 21:20:44
-
RKTX created a new forum topic FS: Texas Skyways Exhaust FairingTexas Skyways Exhaust fairing for Cessna 180/182. I this fairing was included with the purchase of our 180, but we have decided not to install it. It is unmodified, and had not been fit to an airplane,...2016-05-31 18:14:09
-
-
RKTX replied to 0470 running rough+1 on looking into the cheep stuff. Be sure to check the mag switch and P-leads. Had an intermittent problem on our 180 that turned out to be a bad mag switch that was inadvertently grounding our one/both of the mags. Also old P-leads can get to where the shielding has rubbed through the...2015-12-16 20:10:09
-
-
RKTX created a new forum topic Cessna Monarch Fuel Cap Screws?On our 58' 180, the screws that hold the Monarch Caps on are getting a tiny bit rusted, and we figure we better replace them before there stuck for good, however I haven't been able to find hardly any...2015-11-27 02:57:22
-
mountainmatt is friends with RKTX
-
-
-
RKTX created a new forum topic FS: Sensenich 80x27 Wood PropSensenich W80DK27 Wood prop. 35 hours since new. Was originally designed for the 0-200 but also works very well on the c-85. Pulls very hard, and is very smooth. Small amounts of finish missing on the...2015-07-09 16:48:56
-
RKTX created a new forum topic FS: Sensenich 76AK-2-42Sensenich 76AK-2-42 Prop. 280hrs (about) Since New. Came off of a PA-11 with a c-85. In good shape, but there is some paint that got filed off one leading edge while fixing a chip. Pulled hard, and cruised...2015-05-28 01:51:23
