Backcountry Pilot

My kids and I have been learning about 3D printing. Also, an old Maule Fabric Tester that I picked up used didn't have a case. So we designed one. Here's a link in case you'd like to print your own! https://www.printables.com/model/871325-protective-case-for-maule-airplane-fabric-tester Or...

The Cleveland brakes use a small hard ruberry black piece to protect the caliper bleeder valve from dust and debris. They seem pretty expensive to replace through the usual parts supply chains and I seem...

I have two of these, and am using one with great results. http://amzn.to/2esgiNz It requires an amateur radio license, and being in range of an APRS igate. If your packets are received, your track...

I'm going to a permanently-mounted ADS-B receiver so I won't need the stratus anymore. It works great and includes a wall charger and cord for $200.

I have a steel plate that was designed to create a jacking point on planes with tapered gear legs. This one was acquired for a Cessna 150, but I don't know if it will also fit some of the other 100-series...

Has anyone run into compatibility problems with the 26" Goodyear tires and clearance from the brake calipers? My wheels and brakes are the Cleveland 40-75b, which includes the 164-01501 brake disc. A...

Hi everyone, I'm looking for a Pilatus Turbo Porter to look at. Not to buy, just too walk around and look at. I've always been fascinated by the plane, but having recently read some history books about...