-
Moabbyrd and 27 others have joined the group Northern Utah
-
User has deleted their avatar.2017-02-16 21:08:48 -
Darinh created a new forum topic FS: 86" McCauley 2A34C66 Prop, 0 SMOHI have my just back from overhaul C66 up for sale. I sent it to Precision Propeller (Boise, ID) for overhaul back in February and got it back in June. Blades are 90AT-4 (86"). My 180 has been down getting...2015-10-30 20:08:43
-
Darinh created a new forum topic WTB: Early 180/182 Spinner Dome (0752004-2)Anyone have an old 180 spinner dome laying around in the hanger preferably in decent condition without massive dents/cracks, etc? I have the backplate & fillets so just looking for the dome. This is...2015-04-24 17:41:01
-
Darinh created a new forum topic WTB: 86" or 88" McCauley C66 Seaplane PropLooking for a 2A34C66 with 90AT-2 or -4 blades. If you know of any leads let me know. I would also be interested in just the blades. Would also consider a D3A34C401 with 84" or 86" blades if I can find...2015-02-08 19:47:04
-
Darinh created a new forum topic FS: Selkirk Interior PanelsI have the following interior panels for a '54-'63 C180 (also fit a '56-'59 C182) for sale: 3, 4, 5, 6, 7, 8, 9, 10, 13, 15, 17, 19, 20, 28 Here is a link to Selkirk's numbered parts diagram so you...2015-01-01 18:57:57
-
Darinh created a new forum topic FS: FA Dodge Firewall Battery BoxNew in the box FA Doge firewall battery box with paperwork. This is STC'd for 170s, 180s and 185s. $365 new... $325 shipped in the lower US.2014-12-10 20:19:52
-
BeanAviation is friends with Darinh
-
Darinh created a new forum topic FS: David Clark H10-13.4 Headset, Like. NewReplaced my copilot headset with a new Zulu so the DCs are not needed. I bought them last summer and have only used the a few hours. In perfect condition. I have the original box and paperwork. $175 shipped...2014-05-09 03:52:39
-
Darinh created a new forum topic FS: Custom Laser Cut PanelsI have access to a commercial laser cutter and have used it to cut a few panels for my projects. I did my '57 180 and my Kitfox Series 7 panels on it. I have priced laser cutting services and was quoted...2014-03-18 05:36:33
-
I run 100w plus. My winter temps are down to 0 degrees and at startup I see pressures in the low 70's until it warms then it runs in the 50-60 degree range. I heat my hangar though so it's never starting below 45 degrees. If it was outside I would consider the 15w50.2014-03-17 02:36:31
-
-
I'm planning an excursion down south in the next couple weeks and was wondering about the best strips to camp at? We plan on staying at Mexican Mountain but are there others that offer some sort of cover other than just your wing? Mineral Canyon is another I guess. Others? Any "Secret" places that you guys know about you would share? Flying a straight tail 182 and a 180 with capable pilots.2014-03-10 18:34:32
Grassstrippilot Hey Darin. When you going? I'm wanting to down to check out Mexican Mt. I'm thinking around Easter weekend.12 years ago -
Skysteve, I've built and sold a Bearhawk and restored my 180 since the kit fox went down the road.
I think we have two 205s in the group now then if Sixtwoleemer has one. Pretty cool... I almost bought one but figured I couldn't fit the whole family in one anyway (6 kids) so I opted for the 180. I really need a Kodiak.2014-02-24 07:04:08 -
csstricker is friends with Darinh
-
Cory reminded me of the northern utah group so I figured I'd join. I'm hangared at OGD and fly a '57 180. I'm always looking for cool new places to go.2014-02-24 03:10:31
csstricker I am always down to go and fly around as well. I am with the Hill Flying Club ;o) Nice to meet you Darinh!12 years ago -
Grassstrippilot is friends with Darinh
-
Darinh created a new forum topic Best GoPro Case?My wife got me a GoPro Black Edition for Christmas and I have been looking for a good case since. Anyone have one they really like or have seen a good one. I don't care if its a softcase or hard case...2014-01-29 22:42:32
-
