Years ago a friend of mine was flying down the Chilkat river and planned to climb hard and cross over this steel bridge. The pilot completely forgot about the old cable car crossing several hundred yards upstream. He spotted the main cable and pulled up hard, clearing the 1 1/8 line but hooked the 3/8 endless line that pulled the car back and forth. He struck it just about dead center on the prop hub and cut one of the cables, the other end hung on his landing gear.
He rendered about 800 feet of 3/8 steel cable accrues the main gear of his Luscombe while in a full power, full up staggering flight. If memory serves me he ended up going under the bridge.
He finished his flight wondering if the gear leg was sawn through and would fall off on landing. After a very gentle landing he found he had cut clear through the fairing and about half through the gear leg.
A sobering thought huh>
Shane