motoadve wrote:Calibration its pretty easy, fly at the lowest speed where the airplane does not sink or climb, then press the set calibration button and you are done.
Or another method is, stall the airplane see the speed you stalled at, and fly at 1.3 of that speed and press the calibration button at that speed.
I have tried both methods they are really close, I prefer the first method because you are not dealing with ASI inaccuracies.
But, you are setting the device by “feel”. My point being, if you can “feel” what it’s doing at altitude, you can probably do so at landing.
If it gives you a warm fuzzy, good deal. I’m ripping this one out at next annual. It is a POS.
MTV


