Changed my Horton STOL with VGs and flap gap seals to a Sportsman STOL also with VGs.(removed flap gap seals)
Really notice the change and very happy with it.
Put the stall warning according to the template but now it starts making the warning noise about 19 to 25 mph before the stall, and almost all the approaches is quite annoying plus innacurate.
I was told to move it down more, better not not bend the tab but move the unit.
So will do that and start testing.
How many mph is a good way to have the stall warning making the noise?
Before ,when I had the Horton it was about 10 to 12 mph , even then a few times felt it was a bit early, but acceptable.
Will 6 to 8 mph be too close?
Here are my speeds , and when it starts making the noise.
I had my instructor write down the numbers.
Speeds are IAS
In slow flight
With no flaps goes off at 65mph (19mph before the stall)
With 10 flaps goes off at 62mph (22mph before stall)
With 20 flaps goes off at 60mph (22 mph before the stall)
With 40 flaps goes off at 58mph (23 mph before the stall)