Tue Feb 28, 2006 12:30 pm
Zane, I have the fire ext in my 170 mounted horizontally on the front of the seat frame, so it's below my knees when I'm in the airplane. I fabricated an aluminum mount that tie-wraps to the seat frame, then the ext bracket bolts to that. Tie-wrapped to seat frame means temporary installation, so no paperwork required. Had to experiment to figure out the most easily inflight-accessable position for the ext, remember you have to be able to release the latch on the bracket.
If your front seats still have the factory metal skirts, you can bolt the ext bracket right to the front of that, with an aluminum backing plate on the inside of the skirt.
I've seen other 170's with the ext mounted on the floor behind the tunnel, aligned fore-and-aft & on the airplane centerline.
Eric