Backcountry Pilot • Got to ride an elevator

Got to ride an elevator

Did you fly somewhere cool, take photos, and feel like telling the tale to make us drool from the confines of our offices? Post them up!
18 postsPage 1 of 1

Got to ride an elevator

I was fooling around, about a hundred miles from my home base, with a vague thought to make a breakfast landing further north, when I realized I had yet to meet the owner of the area's newest strip. First I got warmed up on a few other sites, not knowing for sure how long his strip was.
Image

Image
Feeling ready to take on a new place, I flew the last few miles and using the radio freq I was given, got an immediate invite to stop by. As I got closer, something looked wrong, I thought I was having vision problems.
Image This was going to be the toughest landing of the day, these long and wide paved runways make me nervous. Not even noticing the several thousand foot long grass strip, and not wanting to mess up the gravel on the side (it looked, like everything else, perfectly arranged) I did my best and taxied over towards.... wait for it: the tower :shock:
Image
Then the airshow started, a nice little aero routine by what I presumed was my host in a Pilatius Porter Go Fast of some sort.Image To say this was all taking place in a very rural part of Idaho, VERY rural, doesn't quite get the idea across. Upon meeting the friendly owner, my mind got further blown by the elevator ride to the top of the tower. Not just a regular elevator, though there's one of those also, but a pneumatic, one person device, operating just like the one at my bank's drive through. Not homemade either, but an obviously fully engineered and manufactured machine. Actually I rode the regular elevator up, and the air one down. Normally I only ride an elevator once a year, when I get my taxes done, down town in Pocatello's high rise office building, 5 stories.

While admiring the view out the tower, we started talking about our strips. His was excavated 55" below grade, then brought up to finish with a carefully engineered and compacted specified gravel mix, all before the final top layer of asphalt. It has easily supported 737's that have also stopped by. His was 7700' long, and fully fenced to a wild life biologist's recommended height, as meeting some of the local's when reaching takeoff speed in one the Lears, or the Gulfstream IV, would not be a good thing.

I then told him how mine was 400' long, twice as long as needed, as I like to make reduced throttle takeoffs. That led to me mentioning it's about a 12% grade, and the only obstacles a 9200' mt. a 1/4 mile off the end, right behind the antenna farm. A few light homebuilts and a Maule seemed to work OK there.The width was determined by 4 passes (I got bored after that, and the landing gear is only 5' wide anyway) of the brushhog I have on the Kubota, about 18'. He must fly at night as his appeared to be lighted. :shock: I go to bed when the sun goes down.

While still up in the tower, he pointed at one nearby high ridge, and commented how it was pretty smooth up top, and he landed his helicopter up there from time to time it was about 9600'. Then I got a look see at the other birds in the hangar, all except the the sailplane hung from the ceiling, too hard to get to. I got to sit in the Pilatius Porter 12, that door on the right is big enough to load a couch or a ATV. The warbird was nice but not my style. He apologized for the lack of aircraft currently in the hangar, "usually we have more", I may have mentioned then my hangar was 28' by 40'. Walking by one of the Lears, I told him how once in Rock Springs WY, getting into my bird with a thermos of coffee in front of a couple of corporate pilots in a Lear, when asked by one what I did when I had to take a leak, I bragged about the ability to just land anywhere. The two pilots looked at each other, then one said "we have a bathroom".

After declining an offer of breakfast (I had wasted too much time on the tour, it would be a bumpy ride back home) we shook hands and I was able to successfully lift off that challenging strip, but then I remembered the 9600' ridge he had pointed out, and I thought what the heck, if he can land a helicopter there I may be able to set down the S-7.
Image

All smart ass sarcasm aside, Joe and I, being about as opposite on the economic scale as possible, had one big thing in common, ELEVATORS. No not really, flying of course. But... it turns out, with all his wide based aviation experience (not even counting what he does for a living, also aviation related, big time, and I don't mean as a airline pilot ((not that there's anything wrong with that )), this whole off airport, WAY off airport thing I was doing kinda blew his mind. When asked about training for such, I realized Lori MacNichols has a cabin right around the corner, probably 2 minutes in the Lear (but the landing would be a bitch), but still only 30 minutes or so in the PC-12, so I partially paid Joe back for my nickel tour by giving him Lori's contact #'s/info. It will be interesting to see where he goes with that, he was REAL interested in the S7-S. At one point I believe he asked how much air I had in the Airstreaks, he guessed 15 lbs. close i told him, 1.5 lbs.
A great trip, great host, incredible setup, world class doesn't come close to describing it, and perfect weather, though I finally ate breakfast at home about 2:30 in the afternoon.
Last edited by courierguy on Tue Sep 02, 2014 6:40 pm, edited 1 time in total.
courierguy offline
User avatar
Posts: 4197
Joined: Thu Mar 31, 2005 6:52 pm
Location: Idaho
"Its easier to apologize then ask permission"
Tex McClatchy

Re: Got to ride an elevator

courierguy wrote:I was fooling around, about a hundred miles from my home base, with a vague thought to make a breakfast landing further north, when I realized I had yet to meet the owner of the area's newest strip. First I got warmed up on a few other sites, not knowing for sure how long his strip

Feeling ready to take on a new place, I flew the last few miles and using the radio freq I was given, got an immediate invite to stop by. As I got closer, something looked wrong, I thought I was having vision problems.
Image .


Holy mackerel!! That place is amazing!! Looks like a Pilatus PC-9, btw.
CapnMike offline
Supporter
User avatar
Posts: 842
Joined: Wed Mar 05, 2014 11:25 am
Location: Kamas, Utah and Sandpoint, Idaho
"If my wings should fail me Lord, please meet me with another pair" - Led Zeppelin
"It's all going in my report..." - CapnMike

Re: Got to ride an elevator

courierguy wrote:I was fooling around, about a hundred miles from my home base, with a vague thought to make a breakfast landing further north, when I realized I had yet to meet the owner of the area's newest strip. First I got warmed up on a few other sites, not knowing for sure how long his strip was.
Image

Image
Feeling ready to take on a new place, I flew the last few miles and using the radio freq I was given, got an immediate invite to stop by. As I got closer, something looked wrong, I thought I was having vision problems.
Image This was going to be the toughest landing of the day, these long and wide paved runways make me nervous. Not even noticing the several thousand foot long grass strip, and not wanting to mess up the gravel on the side (it looked, like everything else, perfectly arranged) I did my best and taxied over towards.... wait for it: the tower :shock:
Image
Then the airshow started, a nice little aero routine by what I presumed was my host in a Pilatius Porter Go Fast of some sort.Image To say this was all taking place in a very rural part of Idaho, VERY rural, doesn't quite get the idea across. Upon meeting the friendly owner, my mind got further blown by the elevator ride to the top of the tower. Not just a regular elevator, though there's one of those also, but a pneumatic, one person device, operating just like the one at my bank's drive through. Not homemade either, but an obviously fully engineered and manufactured machine. Actually I rode the regular elevator up, and the air one down. Normally I only ride an elevator once a year, when I get my taxes done down town in Pocatello's high rise office building, 5 stories.

While admiring the view out the tower, we started talking about out strips. His was excavated 55" below grade, then brought up to finish with a carefully engineered and compacted specified gravel mix, all before the final top layer of asphalt. It has easily supported 737's that have also stopped by. His was 7700' long, and fully fenced to a wild life biologist's recommended height, as meeting some of the local's when reaching takeoff speed in one the Lears, or the Gulfstream IV, would not be a good thing.

I then told him how mine was 400' long, twice as long as needed, as I like to make reduced throttle takeoffs. That led to me mentioning it's about a 12% grade, and the only obstacles a 9200' mt. a 1/4 mile off the end, right behind the antenna farm. A few light homebuilts and a Maule seemed to work OK there.The width was determined by 4 passes (I got bored after that, and the landing gear is only 5' wide anyway) of the brushhog I have on the Kubota, about 18'. He must fly at night as his appeared to be lighted. :shock: I go to bed when the sun goes down.

While still up in the tower, he pointed at one nearby high ridge, and commented how it was pretty smooth up top, and he landed his helicopter up there from time to time it was about 9600'. Then I got a look see at the other birds in the hangar, all except the the sailplane hung from the ceiling, too hard to get to. I got to sit in the Pilatius Porter 12, that door on the right is big enough to load a couch or a ATV. The warbird was nice but not my style. He apologized for the lack of aircraft currently in the hangar, "usually we have more", I may have mentioned then my hangar was 28' by 40'. Walking by one of the Lears, I told him how once in Rock Springs WY, getting into my bird with a thermos of coffee in front of a couple of corporate pilots in a Lear, when asked by one what I did when I had to take a leak, I bragged about the ability to just land anywhere. The two pilots looked at each other, then one said "we have a bathroom".

After declining an offer of breakfast (I had wasted too much time on the tour, it would be a bumpy ride back home) we shook hands and I was able to successfully lift off that challenging strip, but then I remembered the 9600' ridge he had pointed out, and I thought what the heck, if he can land a helicopter there I may be able to set down the S-7.
Image

All smart ass sarcasm aside, Joe and I, being about as opposite on the economic scale as possible, had one big thing in common, ELEVATORS. No not really, flying of course. But... it turns out, with all his wide based aviation experience (not even counting what he does for a living, also aviation related, big time, and I don't mean as a airline pilot ((not that there's anything wrong with that )), this whole off airport, WAY off airport thing I was doing kinda blew his mind. When asked about training for such, I realized Lori MacNichols has a cabin right around the corner, probably 2 minutes in the Lear (but the landing would be a bitch), but still only 30 minute or so in the PC-12, so I partially paid Joe back for my nickel tour by giving him Lori's contact #'s. It will be interesting to see where he goes with that, he was REAL interested in the S7-7.
A great trip, great host, incredible setup, world class doesn't come close to describing it, and perfect weather, though I ate breakfast at home about 2:30 in the afternoon.



Tom, I envy your life!!! Keep it up!!! :D :D
chosstronaut offline
User avatar
Posts: 543
Joined: Thu Apr 05, 2012 5:07 pm
Location: Corvallis
FindMeSpot URL: http://share.findmespot.com/shared/face ... 9a7NU2UfGC
Aircraft: Savannah
Tyler Adams, aka Chosstronaut, perished in a mid-air collision October 12, 2014. He was an enthusiastic and beloved contributor and he will be missed greatly.

Re: Got to ride an elevator

[quoteTom, I envy your life!!! Keep it up!!!][/quote]
Me too. Love all your pic's and experiences.
180Marty offline
Supporter
User avatar
Posts: 2313
Joined: Mon Jan 02, 2006 11:59 am
Location: Paullina IA

Re: Got to ride an elevator

That's cool. Looks like a lot of maintenance. But with equipment like that I'm sure the gentleman can afford some hired help.
Crzyivan13 offline
User avatar
Posts: 1811
Joined: Sat Nov 24, 2012 9:50 pm
Location: Ohio- OI27 Checkpoint Charlie
FindMeSpot URL: https://share.delorme.com/EvanDavis
Aircraft: 1957 Cessna 182A

Re: Got to ride an elevator

LOL. That is a great story. Thanks for sharing. And FWIW, I would rather visit you at your strip than him at his, but hmmm I don't think 400' is going to be quite enough room for my amphib Rebel. Close, but not enough.
AndyH offline
User avatar
Posts: 66
Joined: Fri Oct 23, 2009 2:03 pm
Location: Manitoba
FindMeSpot URL: http://share.findmespot.com/shared/face ... 9RQBq9lKRF
--------------------------------
1998 Murphy Rebel on Floats

Re: Got to ride an elevator

..given the choice, I would still take your set up.
Pete
pouellette offline
User avatar
Posts: 81
Joined: Sat Jan 29, 2011 1:42 pm
Location: WMA
Aircraft: RANS S7S
CHEROKEE 140

Re: Got to ride an elevator

I was going to ask what movies your host had been in until you said his job was aviation related. What a spread.
svanarts offline
User avatar
Posts: 1393
Joined: Sun Aug 10, 2008 3:18 pm
Location: Modesto, CA
Aircraft: 7AC (65HP) Aeronca Champ (borrowed horse)
Six Chuter Skye Ryder Powered Parachute

Re: Got to ride an elevator

BTW the Pilatus Porter is the PC-6, as seen in the movie Air America. One of those could probably operate off your home strip without too much trouble. The PC-12 is the single turboprop biz plane. Not sure on the warbird trainer but Capt Mikes probably right with PC9. Don't know if any of them have model names other than the Porter.
hotrod180 offline
Supporter
User avatar
Posts: 10534
Joined: Wed Jan 26, 2005 11:47 pm
Location: Port Townsend, WA
Cessna Skywagon -- accept no substitute!

Re: Got to ride an elevator

Yeah, the PC-7 and PC-9's are the trainers. I'd give my right you know what to own a -9 for my family truckster.

Gump
GumpAir offline
User avatar
Posts: 4557
Joined: Wed Feb 14, 2007 9:14 am
Location: Lost somewhere in Nevada
Aircraft: Old Clunker

Re: Got to ride an elevator

GumpAir wrote:Yeah, the PC-7 and PC-9's are the trainers. I'd give my right you know what to own a -9 for my family truckster.

Gump


I couldn't find a -9 for sale, but I found this available PC-7. No left nut required, listed at $0.00 in Switzerland. FREE!! (I suspect that's a typo...). [-X :D

http://www.trade-a-plane.com/detail/aircraft/TurboProp/1987/Pilatus/PC-7/1777617.html

Edit: I'd be happy to go pick it up for you, Gump! I'll deliver it free of charge if you pick up the gas... :wink:
CapnMike offline
Supporter
User avatar
Posts: 842
Joined: Wed Mar 05, 2014 11:25 am
Location: Kamas, Utah and Sandpoint, Idaho
"If my wings should fail me Lord, please meet me with another pair" - Led Zeppelin
"It's all going in my report..." - CapnMike

Re: Got to ride an elevator

Ha Ha! I think I can find my way home... :lol:

Gump
GumpAir offline
User avatar
Posts: 4557
Joined: Wed Feb 14, 2007 9:14 am
Location: Lost somewhere in Nevada
Aircraft: Old Clunker

Re: Got to ride an elevator

Seriously! That's amazing. Where is it at Tom? Is it on the sectional?
Grassstrippilot offline
Knowledge Base Author
User avatar
Posts: 3536
Joined: Wed May 31, 2006 6:17 am
Location: Syracuse, UT
FindMeSpot URL: https://share.garmin.com/WolfAdventures
Aircraft: Cessna 205

Re: Got to ride an elevator

Sounds like a fun day! Thanks for sharing!
CamTom12 offline
User avatar
Posts: 3705
Joined: Sun Jul 08, 2012 1:08 pm
Location: Huntsville
FindMeSpot URL: https://share.delorme.com/camtom12
Aircraft: Ruppe Racer
Experimental Pacer
home hand jam "wizard"

Re: Got to ride an elevator

The owner of the Pilatius claimed he needed at least 600', and we didn't get into the lessened need for length due to my strips slope, but I did invite him in. No secret strip, on the charts, but I am trying to respect his privacy so no pictures inside the hangar etc. The pictures I showed are similar to others already out there. You'll know it if you ever see it, that's all I'm going to say.

Here's my control tower, I also call it The House. He didn't have a spiral staircase, I do.Image

I've posted pictures of my strip before, but here it is again.Image


So what we had here was a guy with one of the shortest and funkiest strips around, and another guy with a municipal, big municipal, quality facility, and we both appreciated what we both had going on, USA, what a country!
courierguy offline
User avatar
Posts: 4197
Joined: Thu Mar 31, 2005 6:52 pm
Location: Idaho
"Its easier to apologize then ask permission"
Tex McClatchy

Re: Got to ride an elevator

Cool pictures. I have flown over that place and always wondered what was going on there or who lived there since it is the longest private strip in idaho by a long shot. Looks like quite the shack, though the presence of a tower is weird to me.
scottf offline
User avatar
Posts: 650
Joined: Fri Mar 23, 2012 9:56 am
Location: Meridian, ID
FindMeSpot URL: http://share.findmespot.com/shared/face ... cbQCpIqefS

Re: Got to ride an elevator

And now I realize I flew over that strip, and those ridges on my way to Driggs. While flying over those ridges, you were on my mind the whole time, I was thinking god damn no wonder he loves it up here!
chosstronaut offline
User avatar
Posts: 543
Joined: Thu Apr 05, 2012 5:07 pm
Location: Corvallis
FindMeSpot URL: http://share.findmespot.com/shared/face ... 9a7NU2UfGC
Aircraft: Savannah
Tyler Adams, aka Chosstronaut, perished in a mid-air collision October 12, 2014. He was an enthusiastic and beloved contributor and he will be missed greatly.

Re: Got to ride an elevator

Pretty fancy place in a county that doesn't have a stop light anywhere and has self inspected building inspections. I believe building permits are like a flat fee of $40.
MtCoyote offline
User avatar
Posts: 110
Joined: Sun Jul 16, 2006 1:55 pm
Location: Salmon Idaho
FindMeSpot URL: http://share.findmespot.com/shared/face ... Q4zcUCmX8z

DISPLAY OPTIONS

18 postsPage 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests

Latest Features

Latest Knowledge Base