I frequently hear/read people talking about the danger of sheared valve stems when running low PSI in aircraft tires but I have yet to meet someone with real world experience If it's happened to you...
As some of you know, Brian and Steve at Steve's Aircraft have been working on my Pacer over the winter and spring. The project is nearing completion (just a few weeks out now) so I thought I would show...
My pacer didn't have a beacon or strobes when I bought it, just pos lights, so I picked up a set of these and they work great. I'm not sure if I'm technically legal for night vfr since the pos lights...
If you're running on battery power, leaving the data turned on in flight will drain the battery fast due to the device constantly searching for a signal. I have a hard wired ipad mini mount so I usually...
If you decide to look for a PA-22/20 I'd say that the 0-320, squared wings, and Cleveland wheels/brakes are a must for decent short field performance. Nice to haves would include a Steve's Aircraft skylight,...
The R-2506 only goes up to 6k msl so you could cut a little off your route there. Also, if you contact Joshua and ask for "overflight of the 2505" you've got a 50/50 chance of getting approved to do so...
The Chicken Strip isn't officialy considered an airport. Aside from staying low (100' agl) you could also hug the east or west side of the valley. 99 percent of the ridgeline crossings in Saline are...
The FRS LATT (low altitude tactical training) is slightly different now. Saline and Panamint valleys are the only authorized LATT training areas. Very few instructors / students are aware of the Chicken...
CAP is "cub scouts" for middle aged - elderly men (Nerd Fraternity). I'm sure some squadrons are different but that's my opinion after working closely with several of them (not by choice). Bottom line,...
I was in your situation for most of the past year with similar criteria but required four seats. I narrowed my choices down to a stinson 108, pa 22/20, and c170A. All of these can be had for $30k or...
I have an Ncs-812 which Is very similar. I just removed it by making two small rods from a coat hangar and sticking them in those small holes on each side of the lcd display. Once i had the rods inserted...