Backcountry Pilot • Where didn't you fly today?

Where didn't you fly today?

A general forum for anything related to flying the backcountry. Please check first if your new topic fits better into a more specific forum before posting.
62 postsPage 3 of 41, 2, 3, 4

Nope, 5 gal bucket is too tippy and the loading strap doesn't grip it good enuf... Besides the handle rattles on the chromated floor too much. :roll:
AKGrouch offline
User avatar
Posts: 346
Joined: Sun Feb 24, 2008 11:55 pm
Location: Anchorage, Alaska
1966 C182J
1960 C172 TD :(

AKGrouch wrote:Weather's been real nice. The Iditarod is gonna start this weekend. We are in the middle of Fur Rendevous here in Anchorage. The gorgeous sunshine beckons to me.............sigh..............the buzzard is down with no seats in it. I'm in the middle of a reupholstery job and the seat frames and upholstery are in my IA's hanger.....I have no key and he's in AZ for another week at least.......there is just no justice to it all..........Anyone got some cheese for me to go with my whinning?


Still overhauling here, was hoping to fly out to a village for the race - so much for that idea.
onceAndFutr_alaskaflyer offline
Posts: 1319
Joined: Sun Apr 23, 2006 4:23 pm
Location: Keweenaw Peninsula, Michigan and Carson Valley, Nevada

You still might be able to make it if you aren't tied up too long. They are taking the northern route this year. It would be cool to fly to either Farewell of McGrath if you can. That will probably be the hot spots about Tues and Wed.
AKGrouch offline
User avatar
Posts: 346
Joined: Sun Feb 24, 2008 11:55 pm
Location: Anchorage, Alaska
1966 C182J
1960 C172 TD :(

AKGrouch wrote:You still might be able to make it if you aren't tied up too long. They are taking the northern route this year. It would be cool to fly to either Farewell of McGrath if you can. That will probably be the hot spots about Tues and Wed.

Well my plane is in Fairbanks but my engine is in Washington State <g>
onceAndFutr_alaskaflyer offline
Posts: 1319
Joined: Sun Apr 23, 2006 4:23 pm
Location: Keweenaw Peninsula, Michigan and Carson Valley, Nevada

Well my plane is in Fairbanks but my engine is in Washington State


Well I hope that was a PLANNED departure from your aircraft! :shock:
Skystrider offline
User avatar
Posts: 1232
Joined: Wed Jan 24, 2007 1:44 pm
Location: Saylorsburg
Aircraft: Zenith CH701 w/ Jabiru 3300

once&futr_alaskaflyer wrote:Well my plane is in Fairbanks but my engine is in Washington State <g>


Hmmmmm. Guess your arms would get rather tired then.........oh well, I won't be there either.
AKGrouch offline
User avatar
Posts: 346
Joined: Sun Feb 24, 2008 11:55 pm
Location: Anchorage, Alaska
1966 C182J
1960 C172 TD :(

Plane is on the other side of the state and I need a flight review. I was going to have my Pap's bring the plane over this weekend but with two tests, a quiz, two tough homeworks due, and 36 homeworks to grade all by the beginning of next week I'll be lucky if I get to put the books down at all. I'm sure you guys are laughing at this college kid but I thought school was supposed to be fun :x

The sun was shining bright and the weather was great...sure would have been nice day for a ride in a 7GCBC :wink:
whee offline
User avatar
Posts: 3386
Joined: Fri Jan 20, 2006 1:59 pm
Location: SE Idaho

Just had another 1.5 inches of rain a day ago. Now it is sunny and clear with winds 25 to 30 mph and gusting over 40. Field is starting to get dryer but we still had to pull a RV8 out of the mud. Silly boy thought he was going flying! :lol:

Maybe I can sneak out Easter Sunday?
Skystrider offline
User avatar
Posts: 1232
Joined: Wed Jan 24, 2007 1:44 pm
Location: Saylorsburg
Aircraft: Zenith CH701 w/ Jabiru 3300

teeth

Yesterday was a good day for flying. Got to fly a Cessna 195 for the second time and then deliver a customer down to Modesto, Ca in the 180.

Today wasn't so good since I had my wisdom teeth pulled this morning, now laying around the house surfing and watching movies.

Hope someone burned a little avgas for me today.

WW
wagonwrench offline
User avatar
Posts: 107
Joined: Sat Sep 15, 2007 12:40 pm
Location: Grangeville, ID

I did not fly comercial to Providance RI to get my plane cus the weather sucks.

Tim
qmdv offline
User avatar
Posts: 3633
Joined: Wed Feb 15, 2006 10:22 pm
Location: Payette
FindMeSpot URL: http://share.findmespot.com/shared/face ... I5tqEOk0rc
Aircraft: Cessna 182

Hey Dave, I will go burn some avgas for you tommorrow. I'll flyby your house turning 2850 until you get out of bed! :lol: :lol:

See ya at the hanger later on this week!
Splashpilot offline
User avatar
Posts: 127
Joined: Sat Mar 18, 2006 6:40 pm
Location: Columbia, CA
55' 180
O-520

Didn't fly over to Mason today to see about a radio upgrade. Why? 300 ft. Ceiling, 1/4 mile visibility in snow.
Sitting in front of the fire with my Corgi at my side, adult beverage in hand. Almost as good as flying!
bsdunek offline
User avatar
Posts: 23
Joined: Wed Jan 02, 2008 8:21 am
Location: Michigan
Bruce
1950 Cessna 170A

Re: teeth

wagonwrench wrote:Today wasn't so good since I had my wisdom teeth pulled this morning, now laying around the house surfing and watching movies.WW


Your wisdom teeth are laying around watching TV? :lol:
Skystrider offline
User avatar
Posts: 1232
Joined: Wed Jan 24, 2007 1:44 pm
Location: Saylorsburg
Aircraft: Zenith CH701 w/ Jabiru 3300

Whats left of them :lol: I hope the wisdom doesn't stay in the teeth.

I did see Splashpilots 180 go overhead around noon today. Sounded about like 2850 rpm.

Dave
wagonwrench offline
User avatar
Posts: 107
Joined: Sat Sep 15, 2007 12:40 pm
Location: Grangeville, ID

Re: Where didn't you fly today?

Went riding with this little dude who, at 3, is a better horseman than me.

rw2 offline
User avatar
Posts: 1799
Joined: Sat Dec 22, 2012 1:10 pm
Location: San Miguel de Allende
FindMeSpot URL: https://share.delorme.com/LaNaranjaDanzante
Aircraft: Experimental Maule
Follow my Flying, Cooking and Camping adventures at RichWellner.com

Re: Where didn't you fly today?

#-o
aktahoe1 offline
User avatar
Posts: 2052
Joined: Sun Jul 13, 2008 8:22 am
Location: Alaska and Lake Tahoe = aktahoe
If it looks smooth, it might be. If it looks rough, it is...www.bigtirepilot.com ...www.alaskaheliski.com

Re: Where didn't you fly today?

I flew today but then drove my latest toy around the yard. These things are pretty cool https://vimeo.com/140473616
aktahoe1 offline
User avatar
Posts: 2052
Joined: Sun Jul 13, 2008 8:22 am
Location: Alaska and Lake Tahoe = aktahoe
If it looks smooth, it might be. If it looks rough, it is...www.bigtirepilot.com ...www.alaskaheliski.com

Re: Where didn't you fly today?

Kevin you need some rain up there looks as bad as it does down in auburn
Juan80 offline
Posts: 212
Joined: Sun Oct 28, 2007 5:53 pm
Location: nor.cal
Chuck

Re: Where did you fly today?

Had to do my BFR yesterday so headed to Llano, met up with a flight instructor friend and headed off airport. When we got back our BCP own fiftynineSC was waiting and took us out to lunch. Afterwards fiftynineSC slow-flighted his 185 as I showed him a bunch of local grass strips. We ended up at my Texas home strip 88R and I took this picture of his bird before he headed back to Hooks. Always good to meet a fellow BCP'r and make a new friend. :-)

Image
Barnstormer offline
Posts: 2700
Joined: Sun Oct 14, 2012 7:42 am
Location: Alaska
Aircraft: C185

Re: Where didn't you fly today?

Thanks Phil....had a great time yesterday. Best flying day of the year so far. Really appreciate the time. It had been a while since I'd flown a 180/185 for an hour plus with a notch out and 80 mph. Really fun.

FYI...to the BCPers....got to spend some time at Llano yesterday (sight of the eminent Roundup). The strip and the airport are in top notch condition and all the hard work of the local team really show's. Should be a first class event.
fiftynineSC offline
User avatar
Posts: 390
Joined: Mon Dec 07, 2009 11:41 am
Location: Frisco
Aircraft: Cessna 185F

DISPLAY OPTIONS

PreviousNext
62 postsPage 3 of 41, 2, 3, 4

Who is online

Users browsing this forum: No registered users and 8 guests

Latest Features

Latest Knowledge Base